Down the rabbit hole

I don’t do this very often, but recently I ended up “down Alice’s rabbit hole”….so to speak.

It all started out so innocently…..

I was getting ready to start working on the Saddle-Bill Stork collage quilt and remembered a package of scraps from a workshop that I had taken several years ago. This was important because they were black and white scraps and had “Misty Fuse” already applied to them. They would be PERFECT for my Stork collage.

As I looked, I pulled out a large box labeled “Miscellaneous Fabrics and Blocks”, being fairly certain that the scraps were there. Well, the bag was NOT in this box, but there was a bag of black and white fabrics, with a few reds thrown in for good measure…..

….. leftovers from a charity raffle quilt that had been made many years ago…..

Eventhough these fabrics didn’t have Misty Fuse on them, I pulled them out and started admiring them….

Now, what could I make with these lovely fabrics????

And before I knew it, I was DOWN THE RABBIT HOLE!!!

I decided that I wanted to turn the strip-pieced triangles into Flying Geese blocks and turned to the Accuquilt machine and the FG die that came with the machine…..

In a few short minutes, I was off and making flying geese blocks!!

Before long I had for strips of FG with spacers between them…..

But where are these geese flying to???

Come back tomorrow for more!!

Sub-cutting with Accuquilt

More Accuquilt Fun

As I was getting ready for my retreat and planning to work on my next scrap quilt, I realized that I was going to need a BUNCH of light-colored 2.5-inch squares.  

I had some already cut but not nearly enough.  What I DID have was a plethora (don’t you love that word) of 2.5-inch strips in the needed colors….

I had read that you can use the AccuQuilt to sub-cut strips into squares so it was time to try that out for myself!!

There is already one 90-degree line marked on the die, but I decided that I wanted a few more markings.  I used a fine-point sharpie and added cross-marks, at 3-inch intervals….

I then took each strip and laid it carefully on one of the lines and folded it back and forth as many times as I could…. 

Remembering, of course, that you really don’t want more than 6 layers of fabrics at a time.

I repeated this process for 5 more strips……

….and ran it thru the cutter……

It looked like this when it came out…..

….and VERY quickly, I had a nice stack of squares to use in my design…..

Yes, there was a bit of fabric wastage, but certainly not worth the time that I saved!!!

I am looking forward to using this process to cut more shapes as time goes on.  

Now that I think about it, I could lay 2-inch strips perpendicular across the 3.5-inch dye and quickly cut rectangles for flying geese…..

…or 4.5-inch strips across the 2.5-inch dye and make bigger rectangles…

…or use the angled markings on the dye to make diamonds….


Bottom line…..I think that my purchase of the AccuQuilt cutter has been a good one!!!

More Accuquilt fun!!

This past week, I was so excited when the other dies arrived for my new Accuquilt machine.

I have to admit that I have worried about whether this was a frivolous purchase….would I really use it enough to warrant the money paid??

The first task was to work thru my scrap basket and get everything cut out and stored. I was completely dreading this job since I knew that it would take several days to get it all done.

BUT…..using the Accuquilt strip cutting dies, I was able to cut ALL of these in just 2.5 hours…..

It was fun to see my dog-bed sliver pile at the end of the afternoon…..

The next day I spent another 2.5 hours and cut squares out of the smaller pieces.

But, the REAL test came when I needed to cut 120 patches for two upcoming blocks, and most of these were only 1.5 inches. It only took TWENTY minutes to cut all of these…..

You may notice a few threads on the white squares. I learned that sometimes stray threads get caught in the dies and cause this. Now I know to clean them out!!!

The job for today is to piece these two blocks and make them turn out exactly 10.5 inches…..wish me luck!!!!