When I posted the Inspiration Tuesday photo last week…..

…..I mentioned that it really was calling to me. I kept thinking about it more and more so this weekend, I made a start on the project.

My first task was to put the photo into Photoshop and start cleaning it up as much as I could. I started by applying the “Poster Edge” Filter to help further define the lines…..

I knew that I didn’t need the lights that ran along the top so I started by roughly erasing those….

Finally, I knew that I didn’t want the hooked lines that ran out from the middle ladder, so it was off with their heads…..

When I was happy with the clean-up job, I put the photo into Powerpoint so that I could play with the sizing a bit. I made the photo 6inches by 9 inches and then printed it out using the poster function. This enlarged the photo so that it was printed on a 3×3 page grid, making the finished product about 18 x 30 inches…..

I cut out and taped the 9 pages together…..

….and voila….my full size pattern was born!!

Now, you may have noted that the orientation of the photo has changed. When I printed out a full size photo, Michael and I both looked at it and decided that it needed to be upside down…..

• 

• 

It was simply too top-heavy in the original version.

I started looking at the full-size pattern and realized that there were other unnecessary lines so I started cleaning up some more…..using correction tape this time!!….

So, the final pattern is ready to go…..

Now comes the fun part……